Shop by Brand


Low Range Off-Road 3" Leveling / Lift Kit 2007+


$299.00


Transform your 2007+ Toyota Tundra Regular Cab, Double Cab, Crewmax and Rock Warrior! The new ‘07-‘20 Toyota Tundras look good right off the showroom floor. But when you install our 3" Front 1" Rear Leveling/ Lift Kit, it really makes a difference both on road and off road. 

 Unlike other lifts available on the market that make you disassemble the strut assembly for installation, this leveling kit is designed to fit on top of the strut. Why do we do it this way? Because other lifts pre-load the spring, making your ride harsher.  They are more difficult to install. Many people who have installed the in-the-strut poly spacers in the past have come to us and asked us why their poly spacers are squeezing out of the strut assembly. It is because other lifts aren’t designed to take that kind of abuse. 

Why don’t we make the spacers out of steel like all other leveling kits on the market? We have found that over time,  steel spacers will flex, rust, and lose tolarances. Over time, the other lifts would "pop" meaning the struts begin to move on the spacers. Aluminum has proven best material, preventing rust and lasting a lifetime. We have done our homework here and come up with an easy to install lift, with more engineering and components than any other. If you want a quality lift kit, at an affordable price- you have found it. Included in the kit is:

-Solid CNC machined 6061-T6 Aluminum Spacers with *NEW* pre-installed USA Made Grade 10.9 pressed-in studs, with Serrated Flanged Metric nuts to ensure that there will be no problems down the road. New and improved design shape for even better aesthetics. Same great functionality, upgraded looks! Why do we use studs instead of bolts? Studs are stressed with vertical or axial force. This is why an upgrade to engine head bolts is usually studs. We use studs because they are not stressed as much in a torsional manner (twisting), which makes the whole assembly stronger.

BEWARE OF SPACERS THAT USE A BOLT OR A SCREWED IN STUD IN THE SPACERS!  We have tested other spacers with bolts (even grade 8) and at a measily low torque the bolts shear. We upgraded our spacers years ago to a pressed in forged stud retention. These are by far the strongest on the market. We use USA made Grade 10.9 Studs that are made to take torque in both directions, axial and torsional. Yes, it may cost more... but is it worth the time and money to have to start all over years later?

-CNC Machined 1" Solid Aluminum Blocks with a 1 degree taper to decrease driveline vibrations in the rear. Included also is *NEW* Metric Style u-bolts, the same as factory thread. Comes with new OEM Toyota U-Bolt Nuts, that's right...OEM Toyota.

-CNC Machined Bumpstop Spacers to allow the bumpstops to be used like they were designed, instead of relying on the internal bump stop.

-CNC Machined Differential Drop to keep those Constant Velocity Joint boots from tearing, and keeping those CV Joints from premature wear from the increased angle. We have installed other companies differential drops, and the spacers they include are too long, So we came up with the perfect spacer. When too large of a spacer is used, the differential mounting points have large factory washers that will hit the bushing mount on the differential- Causing metal to metal contact. We like to keep everything like it was designed- no noises, no squeaks, no problems.

-CNC Machined Skidplate drop spacers and longer factory style Grade 10.9 bolts. Why not include a "off the shelf bolt"? Simply put, when doing routine service, the bolts that are on the from the Factory are a 12mm head. Off the shelf metric bolts have a 13mm head...this is not what we send with our kits. Plus, flanged factory style bolts make it easy to keep the bolt in a socket, unlike others for easy removal and installation. The bolt also has an extra large flange area to keep the bolt from sliding through the hole on the skidplate.

-The MOST complete Instructions, we took our time here and provided you with very detailed instructions. They are even in color! (Available in the instructions section of the site, as well as at the top of the description.)

-Allows for up to a 35" Tire. (more with modifications) Modifications involve removing mudflaps and trimming skidplate. We do not suggest over 35" tires if you do not want to do any trimming or modifications. Tire fitment is largely dependent on your wheel choice. 

-Applications include: 2007-2020 Regular Cab Tundra, Double Cab Tundra, Crew Max, Rock Warrior Tundra SR5 and Limited Models.

-Front spacers are clear anodized.

-LIFETIME WARRANTY ON LRT LIFT KITS!

PLEASE NOTE: You cannot use the front lift along with the Bilstein Adjustable 5100 Front Shocks. The Bilsteins give a lift even on the lowest setting which would go to the limits of the Tundra's suspension ball joint and CV Joint Travel. This applies also to the Pro Comp Pro-Runner shocks with the collar flipped for the lift setting.

We have recently started supplying steering bumpstop extension brackets with these lift kits. Some of our dealers that install these kits requested them, and we decided just to throw them in every kit that we sell. It is not needed to install, but they are included if you wish to install them. They are no additional cost, we just throw them in the box as a courtesy to you. They are two brackets that go on the lower part of the knuckle. 

Click the play button to view a step-by-step installation video.

  • Model: LR-LRTundra
  • Manufactured by: Low Range Off-Road

Be the first to write a review.  Write a Review.



Manufacturer Info

PayPal Credit